Table 10. Independent mode with one processor (continued)
Total Processor 1 Total
DIMMs 12 11 10 9 8 7 6 5 4 3 2 1 DIMMs
7 12 10 8 6 5 4 3 7
8 10 9 8 7 6 5 4 3 8
9 12 10 8 6 5 4 3 2 1 9
10 10 9 8 7 6 5 4 3 2 1 10
11 12 10 9 8 7 6 5 4 3 2 1 11
12 12 11 10 9 8 7 6 5 4 3 2 1 12
The following table shows the DIMM population sequence for independent mode when two processors
(CPU1 and CPU2) are installed.
Notes:
• If there are three identical DIMMs to be installed for CPU1, and the three DIMMs have the same Lenovo
part number, move the DIMM to be installed in slot 8 to slot 1.
• If there are three identical DIMMs to be installed for CPU2, and the three DIMMs have the same Lenovo
part number, move the DIMM to be installed in slot 20 to slot 13.
• If there are ten identical DIMMs to be installed for CPU1, and the ten DIMMs have the same Lenovo part
number, move the DIMM to be installed in slot 6 to slot 12.
• If there are ten identical DIMMs to be installed for CPU2, and the ten DIMMs have the same Lenovo part
number, move the DIMM to be installed in slot 18 to slot 24.
Table 11. Independent mode with two processors
Total Processor 2 Processor 1 Total
DIMMs
24
23
22 21
20 19 18
17
16 15
14
13
12 11
10 9 8
7
6 5
4
3
2 1
DIMMs
2 17 5 2
3 17 8 5 3
4 20 17 8 5 4
5 20 17 8 5 3 5
6 20 17 15 8 5 3 6
7 20 17 15 10 8 5 3 7
8 22 20 17 15 10 8 5 3 8
9 22 20 17 15 10 8 5 3 1 9
10 22 20 17 15 13 10 8 5 3 1 10
11 22 20 17 15 13 12 10 8 5 3 1 11
12 24 22 20 17 15 13 12 10 8 5 3 1 12
13 24 22 20 17 15 13 12 10 8 6 5 4 3 13
14 24 22 20 18 17 16 15 12 10 8 6 5 4 3 14
15 24 22 20 18 17 16 15 10 9 8 7 6 5 4 3 15
16 22 21 20 19 18 17 16 15 10 9 8 7 6 5 4 3 16
17 22 21 20 19 18 17 16 15 12 10 8 6 5 4 3 2 1 17
Chapter 3. Hardware replacement procedures 135
To Next Page
Loading...
