Server models with eight 2.5-inch drives
Use this section to understand the cable routing for server models with eight 2.5-inch drives.
Server model: eight 2.5-inch SAS/SATA drives, the rear hot-swap drive assembly, one 16i RAID
adapter
Figure 22. Cable routing for server models with eight 2.5-inch SAS/SATA drives, the rear hot-swap drive assembly, and
one 16i RAID adapter
Cable
From To
1 Power cable for front backplane Power connector on front backplane Backplane power connector 1 on the
system board
2 SAS signal cable for front
backplane
SAS 0 and SAS 1 connectors on front
backplane
C0 and C1 connectors on the 16i
RAID adapter installed on the RAID
adapter slot
3 SAS signal cable for the rear hot-
swap drive assembly
Signal connector on the rear hot-
swap drive assembly
C2 connector on the 16i RAID
adapter installed on the RAID adapter
slot
Chapter 2. Server components 33
To Next Page
Loading...
