Figure 75. Removing USB 3.0 connector vertically
To install the PCIe riser card assembly, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
https://www.youtube.com/watch?v=pIb0bIyfkDY&=
PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
.
Step 1. Assemble the PCIe riser card assembly:
a. Align the bottom of the PCIe riser card to the slot, and rotate the top to fit it into the slot on the
riser-cage; then, move the PCIe riser card slightly to fit the holes into the pins.
Figure 76. PCIe riser card assembly
b. Install the PCIe riser card to the riser cage with screws.
Chapter 3. Server hardware setup 115
To Next Page
Loading...
