Lenze 8200 vector - Page 143

7
Commissioning
The most important codes for commissioning
EDK82EV113 DE/EN/FR 8.1
L
142
Code IMPORTANTPossible settings
No. SelectionLenzeName
C0002*

uSEr
(cont.)
Parameter set
transfer using
the keypad
Keypad ð PAR1 (+ FPAR1)
Overwrite selected parameter set and,
if necessary, FPAR1 with the
corresponding keypad data
71 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
11 With all other function modules
Keypad ð PAR2 (+ FPAR1)
72 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
12 With all other function modules
Keypad ð PAR3 (+ FPAR1)
73 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
13 With all other function modules
Keypad ð PAR4 (+ FPAR1)
74 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
14 With all other function modules
Controller ð Keypad
All available parameter sets (PAR1 ...
PAR4, and FPAR1) are copied to the
keypad
80 With function module Application−I/O,
INTERBUS, PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
20 With all other function modules
Keypad ð Function module
Overwrite the module−specific
parameter set FPAR1 only
40 Only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
Function module ð Keypad
Copy the module−specific parameter
set FPAR1 only
50 Only with function module INTERBUS,
PROFIBUS−DP, LECOM−B,
DeviceNet/CANopen
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com