Lenze E94AYCEO - Page 109

13 Parameter reference
13.3 Parameters of the communication module for slot MXI2
109
Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14842
C14843
C14846
C14850
Parameter | Name:
C14842 | Supervisor IP Address
Data type: UNSIGNED_8
Index: 9733 = 0x2605
Display of the supervisor IP address
(Instance attribute 10 (Supervisor IP Address) in the Device Level Ring (DLR) Object (71 / 0x47)
( 128))
Display range (min. value | unit | max. value)
0 255
Subcodes Info
C14842/1 Supervisor IP address (most significant byte)
C14842/2 Supervisor IP Address
C14842/3 Supervisor IP Address
C14842/4 Supervisor IP address (least significant byte)
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14843 | Supervisor MAC ID
Data type: OCTET_STRING
Index: 9732 = 0x2604
Display of the supervisor MAC ID
(Instance attribute 10 (Supervisor MAC Address) in the Device Level Ring (DLR) Object (71 / 0x47)
( 128))
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14846 | Address Conflict Detection
Data type: UNSIGNED_8
Index: 9729 = 0x2601
Activation of the address conflict detection (ACD)
(Instance attribute 10 (Selectcd) in the TCP/IP Interface Object (245 / 0xF5)
( 132))
Changing this value requires a reset of the device ("power off/on" or "type 0 reset").
Selection list (Lenze setting printed in bold)
0 Deactivated
1Enable
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14850 | All words to scanner
Data type: INTEGER_16
Index: 9725 = 0x25FD
Display of the I/O data words transferred from the communication module (adapter) to the scanner.
In the subcodes, all I/O data words transferred to the scanner are displayed. However, only the configured I/O data
words are valid.
Display range (min. value | unit | max. value)
-32768 32767
Subcodes Info
C14850/1
...
C14850/32
 Read access  Write access  CINH  PLC STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT