Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17 108
13 Parameter reference
13.3 Parameters of the communication module for slot MXI2
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14022
C14840
C14841
Parameter | Name:
C14022 | Quality of Service (DSCP)
Data type: UNSIGNED_8
Index: 10553 = 0x2939
Setting for the prioritisation of the data packets to be transferred using Differentiated Services Codepoints (DSCP)
Setting range (min. value | unit | max. value)
063
Subcodes Lenze setting Info
C14022/1 59 Reserved
C14022/2 47 Reserved
C14022/3 55 Reserved
C14022/4 47 QoS DSCP Scheduled
(Instance attribute 5 (DSCP Scheduled) in the Quality of
Service (QoS) Object (72 / 0x48) ( 130))
C14022/5 43 QoS DSCP High Prio
(Instance attribute 6 (DSCP High Prio) in the Quality of
Service (QoS) Object (72 / 0x48) ( 130))
C14022/6 31 Reserved
C14022/7 27 QoS DSCP Explicit Msg
(Instance attribute 8 (DSCP Explicit Msg.) in theQuality of
Service (QoS) Object (72 / 0x48) ( 130))
Read access Write access CINH PLC STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C14840 | DLR Network Topology
Data type: UNSIGNED_8
Index: 9735 = 0x2607
Display of the used DLR network topology (Device Level Ring)
(Instance attribute 1 (Network Topology) in the Device Level Ring (DLR) Object (71 / 0x47)
( 128))
Selection list (read only)
0 Linear
1 Ring
Read access Write access CINH PLC STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT
Parameter | Name:
C14841 | DLR Network Status
Data type: UNSIGNED_8
Index: 9734 = 0x2606
Display of the DLR network status (Device Level Ring)
(Instance attribute 2 (Network Status) in the Device Level Ring (DLR) Object (71 / 0x47)
( 128))
Selection list (read only)
0 Normal
1 Ring Fault
2 Unexpected Loop detected
3 Partial network fault
4 Rapid fault/restore cycle
Read access Write access CINH PLC STOP No transfer PDO_MAP_RX PDO_MAP_TX COM MOT