14 Implemented CIP™ objects
14.1 General CIP objects
127
Lenze · E94AYCEO communication module (EtherNet/IP™) · Communication Manual · DMS 3.0 EN · 12/2013 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Supported service codes
Service code
[hex]
Name Description
0x54 Forward_Open Opens a CIP connection from the PLC to the target drive.
0x4E Forward_Close Closes a CIP connection from the PLC to the target drive.
0x0E Get_Attribute_Single Outputs the value of a certain attribute.
To Next Page
Loading...
