CMVETH01B 26
Cyclic Data Access
To understand this from the above configuration we named the drive “My_SMVector_Drive”. There are
three sets of tags labeled “My_SMVector_Drive”:
[:C] for the Configuration assembly (1)
[:I] for the Input Assembly (101 in this example)
[:O] for the Output assembly (100 in this example)
Click on the [+] and expand the [My_SMVector_Drive:O] data to reveal all four words that make up the
Output assembly.
To get more data from the drive, the user can optionally map the drive as “Data – INT- With Status” and
map a second input assembly as Status Input (i.e. Assembly 106 shown in the following screenshot).
To Next Page
Loading...
