Lenze SX-1 - Deceleration and Wait Instructions

8.2.2 _______ _____
DEC ccc
DEC Vddd% ____ ___ ____________
Meaning:
Selection of Deceleration rates. Entered directly (ccc) or by Variable (Vdd) as a % maxi-
mum.
Value: ccc=1...100%
Variable number V: ddd = 0 ... 255
Note:
When using 51n
2 acceleration mode, this value is irrelevant, because acceleration and
deceleration are the same.
Input instructions are ignored.
WAIT bbbb ms
WAIT Vddd ms
WAIT lyyy = H
WAIT lzzz = L ______________
Meaning:
Halt program execution tor the time period specitied, or until the input condition is met.
• WAtT bbbb ms: Wait bbbb ms; bbbb = 0 ... 9999;
• WAll Vddd ms: Wait tor the number ot milliseconds detined by variable Vddd;
ddd=0...255.
• WAll lyyy = H: Wait until Input lyy is HIGH (H = 1); yy = 0.01 ... 6.16
• WAIT lzzz = L: Wait until Input lzz is LOW (L = 0); zz = 0.01 ... 6.16
SET Oxxx
SET Oxxx
SET Fvv =
SET Fvv = H*)
Meaning:
Set Output Oxxx (output) to 0 or 1 (L or H); set Flag Fvv to 0 or 1.
Number ot Flag F: vv = 0 ... 99
Number of Output 0: xxx = 0.01 ... 6.16
*) Flags F94 - F99 are tunctionally dedicated.
8/10
Lanze