6
Chapter 2
Basic Setup
This Chapter provides details of installing and configuring the FCS-
0020/WCS-0020.
System Requirements
• To use the wired LAN interface, a standard 10/100BaseT hub or switch and
network cable is required.
• To use the Wireless interface, other Wireless devices must be compliant with the
IEEE802.11b or IEEE802.11g specifications. All Wireless stations must use
compatible settings.
The default Wireless settings are:
Mode: Infrastructure
SSID: ANY
Wireless Security: Disabled
Domain: USA
Channel No.: Auto
2
To Next Page
Loading...
