17
Chapter 4
Advanced Viewing Setup
This Chapter provides information about the optional settings and
features for viewing video via the FCS-0020/WCS-0020. This Chapter
is for the Camera Administrator only.
Introduction
This chapter describes some additional settings and options for viewing live Video:
• Adjusting the video image
• Controlling user access to the live video stream
• Making video available from the Internet
• Using the Motion Detection feature
Adjusting the Video Image
If necessary, the FCS-0020/WCS-0020 Administrator can adjust the Video image.
To Adjust the Video Image:
1. Connect to the Web-based interface of the FCS-0020/WCS-0020. (See Chapter 5
- Web-based Management for details.)
2. Select Administration, then Video & Audio. You will see a screen like the example
below.
4
To Next Page
Loading...
