31
Current
Date & Time
This displays the current date and time on the camera.
If it's not correct, click the Change button to modify the date/time
settings. This button will open a sub-screen where you have 2
options:
• Set the camera's date and time to match your PC.
• Enter the correct date and time.
Time Zone
Choose the Time Zone for your location from the drop-down list.
If your location is currently using Daylight Saving, enable the
Adjust for daylight saving checkbox.
You must UNCHECK this checkbox when Daylight Saving
finishes.
Network Time
Protocol
Enable or disable the Time Server feature as required.
If Enabled, the FCS-0020/WCS-0020 will contact a Network
Time Server at regular intervals and update its internal timer.
NTP Server
Address
Enter the address for the desired NTP server.
Update
The Schedule determines how often the FCS-0020/WCS-0020
contacts the NTP Server.
Select the desired options.
LED Operation
Enable this if you want to use this function.
To Next Page
Loading...
