User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
107
The description of the table is shown below:
ITEM DESCRIPTION
System Name The name provided in System Information.
Firmware
Version
The present firmware version of the system.
Build Number The Build Number of the firmware.
Location The location provided in System Information.
Site The firmware version for specific region.
Device Time The current time on the device.
System Up Time The system elapsing time since last reboot.
System
Operating Mode Either CPE or AP.
MAC Address The MAC address of LAN Interface.
IP Address The IP address of the LAN Interface.
Subnet Mask The Subnet Mask of the LAN Interface.
LAN Interface
DHCP Server DHCP server status.
Status The RF status.
SSID The SSID of the associated AP.
MAC Address The MAC address of the associated AP.
Channel The operating channel.
Signal Strength The signal strength reading of the wireless connection.
Radio Status
Security The security type used for wireless connection.
Mode The method to obtain IP for the WAN interface.
MAC Address The MAC address of the WAN (RF) Interface.
IP Address The IP address of the WAN interface.
Subnet Mask The Subnet Mask of the WAN interface.
Gateway The gateway IP address.
WAN Status
Bandwidth The bandwidth setting of the WAN interface.