User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
85
5.1.4 Management Services
The system supports SNMP, Syslog, UPnP, and Auto Reboot functions for easy management.
These functions can be configured on this page.
SNMP Configuration: By enabling SNMP function, the administrator can obtain the system
information remotely.
Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
Community String: The community string is required when accessing the Management
Information Base (MIB) of the system.
o Read: Enter the community string for accessing the MIB with Read privilege.
o Write: Enter the community string for accessing the MIB with Write privilege.
To Next Page
Loading...
