LevelOne WAB-3003 - CPE Mode Configuration

User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
71
4.5.2. Associated Client Status
The administrator can remotely oversee the status of all associated clients on this page. Associated
client’s MAC, SNR and Idle Time are listed in the table.
 Associated VAP: The specific VAP which the client is associated with.
 ESSID: The Extended Service Set ID which the client is associated with.
 MAC Address: The MAC address of associated clients.
 SNR: The Signal to Noise Ratio of respective client’s association.
 Idle Time: Time period that the associated client is inactive; the time unit is in second.
 Disconnect: Click “Kick” to disconnect the client from this AP.