User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
37
4.2.3 VAP Configuration
To enable each VAP, the administrator must configure each VAP manually. The settings of each VAP
are collected as its profile.
VAP: Enable or disable VAP function.
Profile Name: The profile name of each VAP for identity/management purpose.
ESSID: ESSID (Extended Service Set ID) indicates a unique SSID used by a client device to
associate with a specified VAP. ESSID determines the service level assigned to a client.
VLAN ID: The system supports tagged VLANs (virtual LANs). To enable VLAN function, each VAP
must have a unique VLAN ID; valid values are ranged from 1 to 4094.
To Next Page
Loading...
