LevelOne WAB-3003 - System Upgrade

User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
66
4.4.4 System Upgrade
To upgrade the system firmware, click Browse to search for the new firmware file, and then click
Apply to execute the upgrade process. The first step is to acquire the correct firmware file and
supply it in the User Interface field. During firmware update, please don’t turn off the power to
prevent from damaging the device permanently.
Note:
 To prevent data loss during firmware upgrade, please back up the current settings before
proceeding further.
 Please restart the system after the upgrade. Do not interrupt the system, i.e. power on/off,
during the upgrade or restart process since it may cause damage to the system.