User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
48
4.2.7 Access Control Settings
The administrator can restrict the wireless access of client devices based on their MAC addresses.
Maximum Number of Clients
The system supports various methods of authenticating clients for using wireless LAN. The
default policy is unlimited access without any authentication required. To restrict the station
number of wireless connections, simply change the Maximum Number of Stations to a desired
number. For example, while the number of stations is set to 20, only 20 stations are allowed to
connect to the specified VAP.
Access Control Type
The selected Access Control Type will be the activated policy while the rest will be omitted. The
following is a list of the supported methods for MAC ACL control:
(1) Disable Access Control
No MAC address check required.
To Next Page
Loading...
