LevelOne WAB-3003 - 4 AP Mode Configuration

User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
23
4. AP Mode Configuration
When AP mode is activated, the system can be configured as an Access Point, or a Repeater, or an
Access Point with Repeater depending on deployment needs. This chapter will guide you through
setting up the AP mode with graphical illustrations. The following table shows all the functions of
WAB-3003 in its AP mode.
OPTION System Wireless Firewall Utilities Status
System
Information
Firewall
List
Change
Password
System
Overview
VAP Overview
Service
N
etwork Utilities
Associate
Client Status
Operating Mode General Settings
Network
Settings
VAP
Configuration
Advanced
Configuration
Save & Restore
Repeater
Information
Management
Services
Security Settings
System Upgrade Event Log
QoS
Classification
Repeater
Settings
Reboot
Advanced
Wireless Settings
Access Control
Settings
FUNCTION
Site Survey
Table 4-1: AP Mode Functions