User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
84
LAN Confi
guration: Configure LAN and DHCP settings on this page. IP Address and Netmask
are required fields to set up LAN interface.
IP Address: The IP address of the LAN port.
Netmask: The Subnet mask of the LAN port.
DHCP Server: If enabled, devices connected to this system can obtain an IP address
automatically.
o Enable/ Disable: Select Enable to activate this function or Disable to inactivate it.
o Start IP / End IP: Specify the range of IP addresses to be distributed by the DHCP
server to clients.
o Preferred DNS Server: Enter the IP address of a preferred DNS server; this field is
required.
o Alternate DNS Server: Enter the IP address of a secondary DNS server; this is optional.
o WINS Server IP: Enter the IP address of a WINS (Windows Internet Name Service)
server; this is optional.
o Domain Name: Enter the domain name for this network.
o Lease Time: It can be chosen from the drop-down list to renew Leased LAN IP.
To Next Page
Loading...
