WAN Configuration: Determine the way to obtain the IP address, by Static or DHCP.
Mode: Determine the way to obtain the IP address, by DHCP or Static.
o Static: The administrator can manually set up the static WAN IP address.
▬ IP Address: The IP address of the WAN port.
▬ Netmask: The subnet mask of the WAN port.
▬ Gateway: The gateway IP address of the WAN port.
▬ Primary DNS Server: The IP address of the primary DNS (Domain Name System)
server.
▬ Secondary DNS Server: The IP address of the substitute DNS server.
o DHCP: This connection type is applicable when the system is connected to a network with
the presence of a DHCP server; all related IP information required will be provided by the
DHCP server automatically.
Bandwidth Limit:
o Download: The maximum download bandwidth of WAN interface to be shared by clients.
o Upload: The maximum upload bandwidth of the WAN interface to be shared by clients.
Dynamic DNS: The option can be enabled to bind FQDN-compliant Host Name with this device.
If enabled, the service Provider must be chosen from the drop-down list with provided Host
Name, User Name, User Email and Password.
DDNS: Select Enable to activate this function or Disable to inactivate it.
Provider: The name of the DDNS provider that the system is registered with. Select a DDNS
provider from the drop-down list box.
Host Name: The FQDN registered with the selected DDNS provider.
User name/ E-mail: The account ID, user name or e-mail, registered with the DDNS
provider.
Password/ Key: The password of the account registered with the DDNS provider.
To Next Page
Loading...
