LevelOne WAB-3003 - Page 57

User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
52
 Setu
p/ Connect:
 Connect: Click Connect to associate with the respective AP directly; no further
configuration is required.
 Setup: Click Setup to configure security settings for associating with the respective AP.
o WEP: Click Setup to configure the WEP setting for associating with the target AP.
The following configuration box will then appear at the bottom of the screen. For more
information on the WEP security settings, please refer to Section 4.2.4. Security
Settings.
o WPA-PSK: Click Setup to configure the WPA-PSK setting for associating with the target
AP.
The following configuration box will then appear at the bottom of the screen. For more
information on the WPA-PSK security settings, please refer to Section 4.2.4. Security
Settings.