User’s Manual
WAB-3003 108M 11g Outdoor PoE CPE/ AP/ Bridge
94
Setu
p / Connect:
Connect: Click Connect to associate with the respective AP directly; no further
configuration is required.
Setup: Click Setup to configure security settings for associating with the respective AP or
repeater.
o WEP: Click Setup to configure the WEP setting for associating with the target AP.
The following configuration box will then appear at the bottom of the screen. For more
information on the WEP security settings, please refer to Section 5.2.3 Security
Settings.
To Next Page
Loading...
