LevelOne WAB-5120 - Chapter 3 Basic Settings

Chapter 3 Basic Settings
Factory Default Settings
We’ll elaborate the WAB-5120 factory default settings. You can re-acquire these parameters by default.
If necessary, please refer to the “Restore Factory Default Settings”.
Table 1 Factory Default Settings
Features
Factory Default Settings
Username
admin
Password
admin
Wireless Device Name
WAB-5120XXXXXX (X represents
the last 6 digits of Ethernet MAC
address)
Operating Mode
AP
Data Rate
Auto
LAN
IP Address
192.168.1.1
Subnet Mask
255.255.255.0
Gateway
0.0.0.0
Primary DNS Server
0.0.0.0
Secondary DNS Server
0.0.0.0
Spanning Tree
Enable
802.11 Mode
802.11a/n
Country/Region
United States
Channel Number
149
SSID
LevelOne
Broadcast SSID
Enable
HT Protect
Disable
Data Rate
Auto
Output Power
Full
Channel Mode
20MHz
WMM
Enabled
RTS Threshold (byte)
2346
Fragmentation Length (byte)
2346
Beacon Interval
100
DTIM Interval
1
Space in Meter
0
Flow Control by AP
Disable
Security
Open System