System Requirements
Before configuration, please make sure your system meets the following requirements:
A computer coupled with 10/ 100 Base-TX adapter;
Configure the computer with a static IP address of 192.168.1.x, as the default IP address of the
WAB-5120 is 192.168.1.1. (X cannot be 0, 1, nor 255);
A Web browser on PC for configuration such as Microsoft Internet Explorer 6.0 or above,
Netscape, Firefox, or Google Chrome.
How to Login the Web-based Interface
The WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge provides you with
user-friendly Web-based management tool.
Open Web browser and enter the IP address (Default: 192.168.1.1) of the CPE into the address
field. You will see the login page as below.
Figure 9 Login Page
To Next Page
Loading...
