Wireless Network Name: Enter the virtual SSID for the VAP, default is LevelOne.
Broadcast SSID: In AP mode, hiding network name is necessary when you are in a wireless
environment that may have potential risk. By disabling broadcast SSID, the STA cannot scan and
find the WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge, so that malicious
attack by some illegal STA could be avoided.
Wireless Separation: Wireless separation is an ideal way to enhance the security of network
transmission. Under the mode except wireless client mode, enable “Wireless Separation” can
prevent the communication among associated wireless clients.
WMM Support: WMM (Wi-Fi Multimedia) is a subset of 802.11e. It allows wireless communication
to define a priority limit on the basis of data type under AP mode only, thus those time-sensitive
data, like video/audio data, may own a higher priority than common one. To enable WMM, the
wireless client should also support it
Max. Station Number: By checking the “Max. Station Num” the CPE will only allow up to 32
wireless clients to associate with. By disabling the checkbox the CPE will allow up to 128 clients
to connect, but it is likely to cause network congestion or poor performance.
Security Setting:
To prevent unauthorized radios from accessing data transmitting over the connectivity, the
WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge provides you with rock solid
security settings. For detailed information please go to Chapter 4 Wireless Security Setting.
To Next Page
Loading...
