Lexicon MPX G2 User Guide

7-3
The Effects and Parameters
Lo ± 25dB Clean low frequency boost/cut
Mid +12/-25dB Clean mid frequency boost/cut
Hi ± 25dB Clean high frequency boost/cut
InLvl -64 to 0dB Input level (headroom)
Level 0dB to 64dB Output level
Tone is a set of analog Tone
controls which can be used as a
clean-boost stomp box in front of
your amp, or as a simple clean
preamp when the MPX G2 is used
without an external guitar amp.
When used as a stomp box, Tone
can radically alter the sonic char-
acter of you guitar amp, providing
an alternative channel. When used
without an external amp, Tone can
sculpt some dramatic clean sounds.
Try boosting Lo and Hi while cut-
ting Mid to produce acoustic-like
timbres from a single coil neck
pickup.
Tone
Gain Effects
* = Interpolated; ( ) = Option of preceding parameter
0 190
Lo ±25dB Low frequency Drive
Mid ±25dB Mid frequency Drive
Hi 0-50dB High frequency Drive
InLvl -64 to 0dB Input level (Drive sensitivity)
Level 0dB to 64dB Output level
Crunch is an overdrive effect
with separate drive controls for low,
mid and high frequencies. De-
signed to be used like a stomp box
(in front of your amp), Crunch works
well in combination with other pre-
gain effects like wah, phase shift,
compression, and octave fuzz.
Crunch
0 190
NO PROCESSING STEPS USED
NO PROCESSING STEPS USED

Lexicon MPX G2 Specifications

General

Brand	Lexicon
Model	MPX G2
Category	Recording Equipment
Language	English