Lexicon MPX G2 User Guide

7-31
The Effects and Parameters
The Echo effects are similar to
the Delay effects, except the feed-
back inputs are sent through 1-
pole low-pass filters.
Damp provides control over the
cutoff frequency of the filter. (In-
creasing Damp lowers cutoff fre-
quency.)
Echo (M)
Echo (S)
Echo (D)
Echo (M), Echo (S) and Echo (D)
Mix 0-100% Dry/Wet ratio
Level Off, -89 to +6dB Amount of effect in the processed signal
Time 0-20000ms Delay time in mono version
1:24-24:1echo/beat,
0-22600 ft, 0-6880 M
(Time Units) Selects ms, note, feet, meters, or Tap ms
Time1 0-10,000ms Left delay time
1:24-24:1echo/beat,
0-11,300 ft, 0-3440 M
(Time1 Units) Selects ms, note, feet, meters, or Tap ms
Time2 0-10,000ms, Right delay time
1:24-24:1echo/beat
0-11,300 ft, 0-3440 M
(Time2 Units) Selects ms, note, feet, meters, or Tap ms
Lvl 1* Off, -95 to 0dB In Echo (D) controls left delay output level
Lvl 2* Off, -95 to 0dB In Echo (D) controls right delay output level
Fbk 1 -100 to +100% Left feedback level
(Fbk insert) Effect1, Effect2,Chorus, The outputs of the selected source are scaled by Fbk
Delay,Reverb,EQ
Fbk 2 -100 to +100% Right feedback level
Damp1 0 to +100% Cutoff frequency of low-pass filter in left feedback path
Damp2 0 to +100% Cutoff frequency of low-pass filter in right feedback path
Clear Off, On When On, mutes and resets the delay
* = Interpolated; ( ) = Option of preceding parameter
21 190
Echo (M)
31 190
Echo (S)
40 190
Echo (D)

Lexicon MPX G2 Specifications

General

Brand	Lexicon
Model	MPX G2
Category	Recording Equipment
Language	English