LexiconMPX G2 User Guide
4-6
Linear or Nonlinear
Control
Pressing Options from either of
the Destination value screens lets
you determine the control relation-
ship between the Source and Des-
tination, and clear any or all
patches. Your selection will take
effect immediately when you
press Options again.
"Unchanged" is provided as a selection to allow you
to exit Options without altering or erasing any
patches. Pressing > will step you forward through
the other options.
Patch Values
> Unchanged
From either of the Destination Values screens, pressing Options will allow you
to set the control relationship between your Source and Destination, temporarily
suspend the current patch, or to clear one or more patches entirely.
As selections made in Options will take effect immediately when you press
Options to exit, the first screen, "Unchanged", gives you the choice of exiting
without altering or erasing any patches.
Press > to step through the other control selections: Normal, Inverted, Mid
Peak, and Mid Dip. These let you set the control relationship between the
controller and the parameter as described below.
To Next Page
Loading...
Need help?
General
