80.xx Replace fuser
Replace the fuser using the instruction sheet that came with the replacement part.
80.xx Fuser missing
1 Replace the fuser, following the instruction sheet that came with the replacement part.
2 Touch Continue to clear the message and continue printing.
82.xx Replace waste toner bottle
1 Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
82.xx Waste toner bottle nearly full
Order a replacement waste toner bottle immediately.
1 Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control panel touch More Information.
2 Touch Continue to clear the message and continue printing.
83.xx Transfer module life warning
1 Replace the transfer module, following the instruction sheet that came with the replacement part.
2 Touch Continue to clear the message and continue printing.
83.xx Transfer module missing
Insert the transfer module into the printer.
83.xx Replace transfer module
Replace the transfer module, following the instruction sheet that came with the replacement part.
84 Defective [color] imaging unit
The specified imaging unit is either missing or not functioning properly. Try one or more of the following:
• Remove the specified imaging unit, and then reinstall it.
• Remove the specified imaging unit , and then install a new one.
Troubleshooting 190
To Next Page
Loading...
