Lexmark MS415 - Input Option Hardware Errors; 3 Yy Error Messages

Input option hardware errors
3yy error messages
Error code Description Action
321.51 Motor 1 (Pick/Lift) motor no first encoder Go to
“Option tray pick/lift motor service check” on
page 117.
321.52 Motor 1 (Pick/Lift) motor stop error Go to
“Option tray pick/lift motor service check” on
page 117.
321.53 Motor 1 (Pick/Lift) PWM underflow (motor
overspeed)
Go to
“Option tray pick/lift motor service check” on
page 117.
322.54 Motor 2 (Separator/Passthru) motor no first encoder Go to
“Option tray separator/pass through motor
service check” on page 117.
322.55 Motor 2 (Separator/Passthru) motor stop error Go to
“Option tray separator/pass through motor
service check” on page 117.
322.56 Motor 2 (Separator/Passthru) PWM underflow
(motor overspeed)
Go to
“Option tray separator/pass through motor
service check” on page 117.
324.57 Motor 3 motor no first encoder Go to
“Option tray ACM motor service check” on
page 118.
324.58 Motor 3 motor stop error Go to
“Option tray ACM motor service check” on
page 118.
324.59 Motor 3 PWM underflow (motor overspeed) Go to
“Option tray ACM motor service check” on
page 118.
325.60 Hardware error—Board ID unknown Go to
“Option tray controller card service check” on
page 118.
325.61 Hardware error—Option type unknown Go to
“Option tray controller card service check” on
page 118.
325.62 Hardware error—Product ID unknown Go to
“Option tray controller card service check” on
page 118.
325.63 Hardware error—Sensors are not plugged on the
board.
Go to
“Option tray controller card service check” on
page 118.
331.51 Motor 1 (Pick/Lift) motor no first encoder Go to
“Option tray pick/lift motor service check” on
page 117.
331.52 Motor 1 (Pick/Lift) motor stop error Go to
“Option tray pick/lift motor service check” on
page 117.
331.53 Motor 1 (Pick/Lift) PWM underflow (motor
overspeed)
Go to
“Option tray pick/lift motor service check” on
page 117.
332.54 Motor 2 (Separator/Passthru) Motor no first encoder Go to
“Option tray separator/pass through motor
service check” on page 117.
332.55 Motor 2 (Separator/Passthru) motor stop error Go to
“Option tray separator/pass through motor
service check” on page 117.
4514
Diagnostic information
115