Lexmark MS415 - Front Access Cover Removal; Front Door Sensor Removal

c Install the right front mount to the printer.
Front access cover removal
1 Remove the right cover. See “Right cover removal” on page 185.
2 Remove the front door. See “Front door removal” on page 208.
3 Remove the nameplate. See “Nameplate removal” on page 199.
4 Remove the MPF assembly. See “MPF assembly removal” on page 203.
5 Remove the bezel. See “Bezel removal” on page 198.
6 Remove the control panel assembly. See “Control panel assembly removal” on page 199.
7 The front access cover remains.
Front door sensor removal
1 Remove the front door. See “Front door removal” on page 208.
2 From under the right front mount, remove the screw (A).
Note: Use a #0 Phillips screwdriver.
4514
Repair information
211