Security Settings Help
Confidential Print
Security Audit Log
Set Date and Time
General Settings
Print Settings
Print All Guides
Print Quality
Printing Guide
Media Guide
Print Defects Guide
Menu Map
Information Guide
Connection Guide
Moving Guide
Supplies Guide
1
Depending on the printer setup, this menu item appears as Network Setup Page or Network [x] Setup Page.
2
Depending on the printer setup, this menu item appears as Standard Network or Network [x].
Diagnostics menu
The Diagnostics menu group contains the settings and operations used while manufacturing and servicing the printer.
Entering the Diagnostics menu
1 Turn off the printer.
2 Press and hold 3 and 6.
3 Turn on the printer.
4 Release the buttons when the splash screen appears.
Status/Supplies
Select this to view the status of the supplies.
Registration
These settings adjust the margins of the black plane.
To set the Registration:
1 Print a Quick test page.
a From the Diagnostics menu, navigate to:
Registration > Quick Test
b Retain this page to determine the changes you need to make to the margin settings. The alignment diamonds
in the margins should touch the margins of the page.
The Quick test page contains the following information:
• Printer registration settings
• Code levels
4514
Service menus
121
To Next Page
Loading...
