7 Flip the UICC, and remove the four screws (C) securing the display bracket.
C
Note: The control panel cover, buttons, and light pipe are not included with the UICC.
Control panel USB port removal (MS610dn)
1 Remove the right cover. See “Right cover removal” on page 241.
2 Remove the nameplate. See “Nameplate removals” on page 263.
3 Remove the bezel. See “Bezel removals” on page 261.
4 Remove the control panel assembly. See “Control panel assembly removals” on page 265.
4514-6xx
Parts removal
274
To Next Page
Loading...
