Lexmark MS610dn

Printer
specifications
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption
(Watts)
Printing The product is generating hard‑copy output from electronic inputs. 600 (MS510dn); 640
(MS610dn, MS610de)
Copy The product is generating hard‑copy output from hard‑copy original
documents.
NA
Scan The product is scanning hard‑copy documents. NA
Ready The product is waiting for a print job. 9
Sleep Mode The product is in a high‑level energy‑saving mode. 5
Hibernate The product is in a low‑level energy‑saving mode. 1
O The product is plugged into an electrical outlet, but the power switch is
turned o.
0
The power consumption levels listed in the previous table represent time-averaged measurements.
Instantaneous power draws may be substantially higher than the average.
Values are subject to change. See
www.lexmark.com for current values.
Electrical specifications
Low-voltage models
• 100 to 127 V ac at 47 to 63 Hz nominal
• 90 to 137 V ac, steady state operational extremes
High-voltage models
• 220 to 240 V ac at 47 to 63 Hz nominal (not available in all countries)
• 198 to 254 V ac, steady state operational extremes
Applicability of Regulation (EU) 2019/2015 and (EU)
2019/2020
Per Commission Regulation (EU) 2019/2015 and (EU) 2019/2020, the light source contained within this product
or its component is intended to be used for Image Capture or Image Projection only, and is not intended for
use in other applications.
4514-6xx
Printer specifications
359