Lexmark MS826 Service Manual

Action Yes No
Step 7
Perform a print test.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Sensor (narrow media) late-arriving jam service check
Action Yes No
Step 1
Check the fuser for damage and life expiration.
Is the fuser damaged or has it reached end of life?
Go to step 2. Go to step 3.
Step 2
Replace the fuser. See
“Fuser removal” on page 452.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
Remove obstructions from the fuser.
Does the problem remain?
Go to step 4. The problem is
solved.
Step 4
a Enter the Diagnostics menu, and then navigate to:
Printer diagnostics and adjustments > Sensor tests
b Find the sensor (Narrow media).
Does the sensor status change while toggling the sensor?
Go to step 8. Go to step 5.
Step 5
a Remove the right cover. See “Right cover removal” on
page 420.
b Check the cable J60 on the controller board for proper
connection.
Is the cable properly connected?
Go to step 8. Go to step 6.
Step 6
Reseat the cable, and then perform a print test.
Does the problem remain?
Go to step 7. The problem is
solved.
Step 7
Replace the fuser. See
“Fuser removal” on page 452.
Does the problem remain?
Go to step 8. The problem is
solved.
4064
Diagnostics and troubleshooting
103

Lexmark MS826 Specifications

General

Print Technology	Monochrome Laser
Print Speed	Up to 70 ppm
Print Resolution	1200 x 1200 dpi
Duplex Printing	Standard
Monthly Duty Cycle	Up to 350, 000 pages
Processor Speed	1 GHz
Recommended Monthly Page Volume	5, 000 - 75, 000 pages
First Page Out	As fast as 4 seconds
Standard Memory	1024 MB
Maximum Input Capacity	4, 400 pages
Connectivity	USB, Ethernet, Wireless
Media Types Supported	Cardstock, Envelopes, Plain paper
Operating Systems Supported	Windows, macOS, Linux
Standard Paper Input	650 pages
Weight	52.5 lbs