Maintenance kits
The control panel displays an 80.xy error at required maintenance intervals. It is necessary to install the
appropriate maintenance kit to maintain the print quality and reliability of the printer. The following maintenance
kits are available:
Part number and kit Contents
41X2242—200K Maintenance kit, Hot roll fuser (115 V
Contact Detack LRP, Type 11)
Note: This fuser is not applicable to MS82x, B2865,
M5255, and M5270 printer models.
• 41X2147—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2243—200K Maintenance kit, Hot roll fuser (220 V
Contact Detack LRP, Type 13)
Note: This fuser is not applicable to MS82x, B2865,
M5255, and M5270 printer models.
• 41X2148—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2244—200K Maintenance kit, Hot roll fuser (115 V
NLRP Contact Detack ASM, Type 17)
Note: This fuser is not applicable to MS82x, B2865,
M5255, and M5270 printer models.
• 41X2149—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2245—200K Maintenance kit, Hot roll fuser (220 V
NLRP Contact Detack ASM, Type 19)
Note: This fuser is not applicable to MS82x, B2865,
M5255, and M5270 printer models.
• 41X2150—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2233—225K Maintenance kit, Belt SY fuser (115 V
LTR LRP, Type 00)
Note: This fuser is not applicable to the MS725 printer
model.
• 41X1115—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2234—225K Maintenance kit, Belt SY fuser (230 V
A4 LRP, Type 01)
Note: This fuser is not applicable to the MS725 printer
model.
• 41X1116—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2235—225K Maintenance kit, Belt SY fuser (100 V
A4 LRP, Type 02)
Note: This fuser is not applicable to the MS725 printer
model.
• 41X1117—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
41X2236—225K Maintenance kit, Belt SY fuser (115 V A4
LRP, Type 03)
Note: This fuser is not applicable to the MS725 printer
model.
• 41X2141—Fuser
• 41X1108—3 Pick rollers
• 41X1119—3 Tray separators
• 41X1076—Transfer roller
4064
Maintenance
760
To Next Page
Loading...
