Lexmark MS826 - Motor (Staple Finisher Right Tamper) Removal; Motor (Staple Finisher Left Tamper) Removal

Motor (staple finisher right tamper) removal
1 Remove the staple
finisher
left cover. See “Staple
finisher
left cover removal” on page 584.
2 Remove the staple finisher right cover. See “Staple finisher right cover removal” on page 586.
3 Remove the staple
finisher
top cover. See “Staple
finisher
top cover removal” on page 588.
4 Disconnect the cable (A), and then remove the two screws (B).
5 Remove the motor.
Motor (staple
finisher
left tamper) removal
1 Remove the staple
finisher
left cover. See “Staple
finisher
left cover removal” on page 584.
2 Remove the staple finisher right cover. See “Staple finisher right cover removal” on page 586.
3 Remove the staple finisher top cover. See “Staple finisher top cover removal” on page 588.
4064
Parts removal
619