Lexmark MS826 - 230 Paper Jams; 230 Paper Jam Messages

Action Yes No
Step 8
Perform a print test.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
230 paper jams
230 paper jam messages
Error code Description Action
230.03 Paper fed from the MPF never reached the sensor
(duplex path).
See
“Sensor (duplex path) late-arriving jam
service check” on page 106.
230.05 Paper fed from the MPF never cleared the sensor
(duplex path).
See
“Sensor (duplex path) late-leaving jam
service check” on page 108.
230.12 Paper fed from tray 1 was detected earlier than
expected at the sensor (duplex path).
See
“Sensor (duplex path) early-arriving jam
service check” on page 105.
230.13 Paper fed from tray 1 never reached the sensor
(duplex path).
See
“Sensor (duplex path) late-arriving jam
service check” on page 106.
230.14 Paper fed from tray 1 cleared the sensor (duplex
path) earlier than expected.
See
“Sensor (duplex path) early‑leaving jam
service check” on page 108.
230.15 Paper fed from tray 1 never cleared the sensor
(duplex path).
See
“Sensor (duplex path) late-leaving jam
service check” on page 108.
230.22 Paper fed from tray 2 was detected earlier than
expected at the sensor (duplex path).
See
“Sensor (duplex path) early-arriving jam
service check” on page 105.
230.23 Paper fed from tray 2 never reached the sensor
(duplex path).
See
“Sensor (duplex path) late-arriving jam
service check” on page 106.
230.24 Paper fed from tray 2 cleared the sensor (duplex
path) earlier than expected.
See
“Sensor (duplex path) early‑leaving jam
service check” on page 108.
230.25 Paper fed from tray 2 never cleared the sensor
(duplex path).
See
“Sensor (duplex path) late-leaving jam
service check” on page 108.
230.32 Paper fed from tray 3 was detected earlier than
expected at the sensor (duplex path).
See
“Sensor (duplex path) early-arriving jam
service check” on page 105.
230.33 Paper fed from tray 3 never reached the sensor
(duplex path).
See
“Sensor (duplex path) late-arriving jam
service check” on page 106.
230.34 Paper fed from tray 3 cleared the sensor (duplex
path) earlier than expected.
See
“Sensor (duplex path) early‑leaving jam
service check” on page 108.
230.35 Paper fed from tray 3 never cleared the sensor
(duplex path).
See
“Sensor (duplex path) late-leaving jam
service check” on page 108.
230.42 Paper fed from tray 4 was detected earlier than
expected at the sensor (duplex path).
See
“Sensor (duplex path) early-arriving jam
service check” on page 105.
230.43 Paper fed from tray 4 never reached the sensor
(duplex path).
See
“Sensor (duplex path) late-arriving jam
service check” on page 106.
4064
Diagnostics and troubleshooting
104