Lexmark MS826 - Upper Redrive Drive

Upper redrive drive
Exit path
1
2345
1 Lower redrive roller
2 Upper redrive roller
3 Diverter
4 Sensor (bin full)
5 Motor (redrive)
Paper is ejected by the upper redrive rollers to the bin. By default, the diverter will direct the paper toward the
bin. If a plunger changes the position of the diverter, then the paper will move upwards to the optional bin.
The redrive rollers are controlled by the motor (redrive). The sensor (bin full) senses if the bin is already full.
4064
Theory of operation
879