Change history
Change history
January 24, 2020
• Control panel (2.4‑inch) cover FRU PN was changed from 41X2689 to 41X2690 on the Control panel
(2.4‑inch display) parts catalog.
• Updated the Updating the printer firmware topic to include using a USB cable connection option.
January 10, 2020
• Front door pivot (41X1643) was added to the Covers parts catalog.
December 19, 2019
• Resetting the roller kit counter information was removed from the Maintenance chapter.
November 15, 2019
• Control panel (2.4‑inch) cover removal was added.
• Control panel (2.4‑inch) board and display removal was added.
• Cable harness (41X2316) was added to the Electronics 1 parts catalog.
• An error code (202.95) was added to the 202 paper jam messages.
• HCOE rear door PN was changed from 41X1896 to 41X1869.
October 11, 2019
• Control panel (2.4‑inch) cover (41X2689) was added to the Control panel (2.4‑inch display) parts catalog.
September 20, 2019
• Supplies security error service check was added to address 938.04 errors.
August 16, 2019
• LVPS failure service check was updated to include replacing the controller board.
• Combo card (41X2703) for 2.4‑inch control panel models was added to the Miscellaneous parts catalog.
July 18, 2019
• Part numbers and descriptions were updated for the Fuser parts catalog.
• Wax wiper FRU PN was changed from 40X0581 to 40X8581.
• Oil wiper FRU PN was changed from 40X0579 to 40X8579.
• Optional staple finisher operation section was added.
June 17, 2019
• Printhead error service check was updated.
• Error codes and descriptions were updated for the 32 user attendance messages.
• Unsupported toner cartridge service check was added to address 32.40D errors.
4064
Change history
27
To Next Page
Loading...
