Lexmark MS826 - Staple Cartridge Access Door Removal; Sensor (Staple Throat Paper Present) Removal

Staple cartridge access door removal
Open the access door (A), and then pull it o the cover.
Sensor (staple throat paper present) removal
1 Remove the staple finisher right cover. See “Staple finisher right cover removal” on page 586.
2 Remove the staple finisher top cover. See “Staple finisher top cover removal” on page 588.
3 Remove the staple unit carriage. See “Staple unit removal” on page 592.
4064
Parts removal
644