May 31, 2019
• Fuser components information was added to the Printer operation section.
• Inspection guide was added to the Maintenance section.
• Step for removing the printhead access cover was added to the Fuser removal.
• Wax wiper (40X0581) and oil wiper (40X0579) were added to the Fuser Parts catalog.
• Printhead access cover (41X1063) was added to the Covers Parts catalog.
• Transfer roller contact (41X2673) was added to the Electronics 2 Parts catalog.
• Transfer roller contact removal was added.
• System software error service check was updated.
May 10, 2019
• Critical information for controller board or control panel replacement was added to the Parts removal section.
• Printhead shield (41X2137) was added to the Electronics 1 Parts catalog.
• Descriptions for 41X1094 and 41X1093 were swapped on the Electronics 2 Parts catalog.
February 15, 2019
• An error code was added to the 221 paper jam messages.
• An error code was added to the 240 paper jam messages.
• Error codes were added to the 241 paper jam messages.
January 11, 2019
• Model information was revised for the description of the 41X1127 FRU on the Electronics 1 Parts catalog.
December 10, 2018
• Added Maintenance kits in the parts catalog section.
November 16, 2018
• Spacer (41X2181), Caster base (41X2180), and Caster wheel (41X2345) FRUs were added to the
Miscellaneous Parts catalog.
October 30, 2018
• Guide roller (41X2610) was added to the Motors Parts catalog.
• Guide roller (41X2610) was added to the Electronics 1 Parts catalog.
October 16, 2018
• User attendance messages section was added.
• Installation information was added to the Controller board removal.
September 27, 2018
• Controller board (41X2606) was added to the Electronics 1 Parts catalog.
• Step for checking the roller was added to the Sensor (fuser exit) late-arriving jam service check.
• New topics (147 error messages and MPF drive failure service check) were added.
• New error codes and service checks were added to the 420 paper jams section.
4064
Change history
28
To Next Page
Loading...
