Hot roll fuser components
#Part Function
1 Fuser wiper Cleans the roller.
2 Detack finger Separates the paper from the roller.
3 Fuser exit rollers Transports the paper out of the fuser.
4 Knob Locks or unlocks the fuser.
5 Sensor (narrow media) Detects paper with narrow width.
6 Sensor (fuser exit) Detects the paper passing the fuser.
7 Connector Automatically connects the fuser to the printer after inserting the fuser.
8 Pressure roller Applies pressure to the paper.
9 Heater lamp Supplies heat to the fusing process.
10 Hot roller Applies heat to the paper.
11 Thermistor Detects the temperature of the fuser.
4064
Theory of operation
878
To Next Page
Loading...
