Fuser components
Belt fuser components
#Part Function
1 Hot belt Applies heat to the paper.
2 Fuser exit rollers Transports the paper out of the fuser.
3 Knob Locks or unlocks the fuser.
4 Sensor (fuser exit) Detects the paper passing the fuser.
5 Thermistor Detects the temperature of the fuser.
6 Connector Automatically connects the fuser to the printer when inserting the fuser.
7 Pressure roller Applies pressure to the paper.
8 Heater bar Supplies heat to the fusing process.
4064
Theory of operation
877
To Next Page
Loading...
