20Understanding the Operator Panel: MFP Touch Screen
Several examples of how to use the operator panel to select and
store new values are shown below. The section “Selecting a New
Value as a Setting” on page 20 shows all details, while the following
two sections discuss slight differences.
User-selected default settings remain in effect until you save new
settings or restore the factory defaults. All saved options become
active on the next host session.
Selecting a New Value as a
Setting
To select a new value
1 Navigate to the SCS/TNe MENU as explained in “MFP Touch
Screen” on page 19.
2 For this example, touch SCS/TNe MENU.
3 Now you will see a list of menus. Touch or to scroll
to the desired item. In this example locate and touch
TN3270E SETUP.
4 Now you will see a list of menus. Touch or to scroll
to the desired item. In this example locate and touch SCS
OPTIONS.
5 Now you will see a list of menus. Touch or to scroll
to the desired item. In this example locate and touch MISC
SETTINGS.
To Next Page
Loading...
