Head
49
⏐
GA10218_0101 - 5/2002
1. Level 2. Level 3. Level
Main menu
View Scale linear/logarithmic
Display-range auto/manual
Time axis
Contrast
Background in Stand-by
Lower display limit
Mode Sniff/Vacuum
Trigger & Alarms Trigger Level 1
Trigger Level 2
Trigger Level 3
Units
Volume
Alarm delay
Audio alarm type
Calibration internal
external
Settings Vacuum settings Vent delay
Vacuum ranges
Partial flow setup
Sniff factor
Machine factor
Leak rate internal test leak
Filter & Background Background suppression
Calculate inlet area background
Leak rate filter
Mass
Interfaces Location of Control
Define recorder output
RS232
Define PLC outputs
Define PLC inputs
Scaling Recorder Output
Scaling Recorder Output
Miscellaneous Time&Date
Language
Calibration request
Service interval fore pump
Service interval exhaust oil filter
Service message exhaust oil filter
Parameter save / load
Monitoring functions Pressure limits for sniff mode
Maximum evacuation time
Pressure limits for vacuum mode.
Information
View settings
View internal data
Vacuum diagram
View error list
Calibration history
Calibration factors
Service
Access Control Access to CAL function
Change Device-PIN
Change Menu-PIN
Zero
Fig. 17 Menu structure overview
To Next Page
Loading...
