Head
57
⏐
GA10218_0101 - 5/2002
6.4.5 Volume
Main menu > Trigger & Alarms > Volume
The minimum loudness and the actual volume of the loudspeaker can be
adjusted.
The minimum loudness is the minimum speaker volume that cannot be
exceeded to even lower values. Thus it is avoided that the actual volume
is accidentally adjusted to a value that is below the noise level of the envi-
ronment.
The actual volume can be adjusted between 15 (maximum) and the value
defined as minimum loudness.
Softkey 2: ↑
Scroll up to select a pressure unit.
Softkey 3: ↓
Scroll down to select a pressure unit.
Softkey 6: ↑
Scroll up to select a leak rate unit.
Softkey 7: ↓
Scroll down to select a leak rate unit.
Softkey 2: ↓
Decrease the minimum loudness. The minimum value is 0.
Softkey 3: ↓
Decrease the actual volume. The minimum value is limited by the mini-
mum volume.
Softkey 4: Beep off / Beep on
Softkey 5: ?
Help text.
Softkey 6: ↑
Increase the minimum volume. The maximum value is 15.
Softkey 7: ↑
Increase the regular volume. The maximum value is 15.
To Next Page
Loading...
