Head
GA10218_0101 - 5/2002
⏐ 62
6.6.1 Vacuum settings
Main menu > Settings > Vacuum settings
This menu allows to observe and to change the settings belonging to the
vacuum system.
The menu for the PhoeniXL
300 dry
version allows the following vacuum set-
tings which varies to the PhoeniXL
300
:
Softkey 3: Vent delay
Refer to chapter 6.6.1.2
Softkey 4: Vacuum ranges
Refer to chapter 6.6.1.3
Softkey 5: Partial flow setup
Refer to chapter 6.6.1.4
Softkey 6: Sniffer factor
Refer to chapter 6.6.1.5
Softkey 7: Machine factor
Refer to chapter 6.6.1.6
Softkey 8: Leak rate internal test leak
Refer to chapter 6.6.1.7
Softkey 2: Automatic purge
Refer to chapter 6.6.1.1
Softkey 3: Vent delay
Refer to chapter 6.6.1.2
Softkey 4: Vacuum ranges
Refer to chapter 6.6.1.3
Softkey 6: Sniffer factor
Refer to chapter 6.6.1.5
Softkey 7: Machine factor
Refer to chapter 6.6.1.6
Softkey 8: Leak rate internal test leak
Refer to chapter 6.6.1.7
To Next Page
Loading...
