Installation
26
300554859_002_C0 - 11/2016 - © Leybold
The noise level when the pumps are running is below 70 dB(A). No acoustic
insulation is required.
The area around the controls (on/off switches, for example) must remain free-
ly accessible.
Check the installation place regularly as to escaping oil so as to reduce the
risk of slipping.
Do not move the pump system without first switching it off and allowing the
turbo pump and backing pump to come to a complete stop.
Only put the TURBOLAB 90 and 250 into operation if the pump is fastened
securely on the TURBOLAB by means of the safety strap.
Fig. 3.2 Safety strap
Safety strap
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
